Two rows of barrel-shaped rollers run between a common outer raceway and two inner raceways inclined to the bearing axis, which lets the inner ring articulate relative to the outer ring and accommodate shaft misalignment without loss of load capacity. The 22213-E1-XL has a bore of 65.0 mm, outside diameter of 120.0 mm, width of 31.0 mm and a net mass of 1.476 kg. Main dimensions follow DIN 635-2. Limiting speed is 7000 1/min, reference speed 4200 1/min. The design carries the E1 reinforced-rib profile, a cylindrical bore (Z), a polyamide cage (JPA) and normal radial internal clearance (CN, Group N). The spherical raceway geometry makes this bearing suitable where shaft deflection or housing misalignment must be tolerated without binding the rolling elements. Normal internal clearance keeps radial play within the standard range after mounting with an interference fit, while the polyamide cage allows smooth roller guidance at the stated speed limits. Relubrication follows the standard scheme, so grease replenishment intervals can be based on the reference speed value given above; no seals are integrated, so lubrication and contamination protection must be provided by the housing.