This spherical roller bearing accommodates radial loads together with angular misalignment between shaft and housing, made possible by its two rows of rollers running on a common sphered raceway in the outer ring. Main dimensions follow DIN 635-2: bore diameter 95.0 mm, outside diameter 170.0 mm, width 43.0 mm, net mass 3.958 kg. The bore is tapered at 1:12 (K), allowing mounting on a tapered shaft seat or with a sleeve, giving a defined interference fit. The E1 design provides an optimized internal geometry for the roller-raceway contact. Limiting speed is 4850 1/min, reference speed 3300 1/min. Radial internal clearance is CN (Group N), suited for standard fit conditions without special clearance adjustment. The cage is a polyamide (JPA) design, guiding the rollers and reducing friction at the given speed range. The tapered bore lets the bearing take up shaft deflection and simplifies mounting compared to a cylindrical bore, since clearance can be set during fitting. Relubrication is standard, so the bearing can be replenished with grease through its lubrication points during service without disassembly.