This single row cylindrical roller bearing carries a bore of 110.0 mm, an outside diameter of 200.0 mm and a width of 53.0 mm, with a net mass of 7.958 kg. The outer ring has 2 ribs and the inner ring has 1 rib with an internal rib washer, giving a locating bearing configuration of type NUP. The E design provides an optimized internal geometry, and the M1 cage is a machined brass cage. Limiting speed is rated at 6100.0 1/min, with a reference speed of 2750.0 1/min. Radial internal clearance corresponds to CN (Group N), the standard clearance range, suitable where no special axial adjustment beyond the locating function is required. The rib arrangement on both rings allows this bearing to take up axial loads in both directions while acting as the locating bearing of a shaft assembly, guiding the shaft radially and axially. The machined cage supports operation at the stated speed ratings and even roller guidance across the roller set.