This single row cylindrical roller bearing carries radial loads with a bore diameter of 105.0 mm, outside diameter of 190.0 mm and width of 36.0 mm, giving a net mass of 4.758 kg. The design features two ribs on the outer ring and one rib on the inner ring, making it a semi-locating bearing that allows axial displacement in one direction while providing guidance in the other. The E design indicates an optimized internal geometry for increased load carrying capacity. The M1 cage is a machined brass cage, suitable for the limiting speed of 6500 1/min and reference speed of 3400 1/min. With radial internal clearance in the CN (Group N) group, this bearing is set up for standard fit conditions without special preload or extra clearance requirements. The semi-locating design allows the bearing to accommodate axial shaft expansion while still transmitting radial loads efficiently. The single rib on the inner ring together with the two ribs on the outer ring permits the inner ring to be separated from the outer ring assembly during mounting, simplifying installation and dismounting on the shaft.