This cylindrical roller bearing carries radial loads through a single row of rollers guided by a polyamide cage (TVP2), with two ribs on the outer ring and a smooth inner ring, allowing axial displacement between shaft and housing — a non-locating bearing design. Bore diameter is 85.0 mm, outside diameter 180.0 mm, width 41.0 mm, and net mass 4.475 kg. The E design provides increased roller load capacity within the same envelope dimensions. Limiting speed is rated at 5200 1/min, with a reference speed of 3900 1/min. Radial internal clearance corresponds to CN (Group N), suitable for standard fit conditions without preload requirements. Running accuracy is manufactured to P6, giving tighter dimensional and rotational tolerances than standard P0 execution. Since the inner ring is smooth and the outer ring carries the ribs, the bearing accommodates axial shaft movement while maintaining radial guidance, making it suitable as a floating bearing position in a shaft arrangement paired with a locating bearing elsewhere on the shaft.