This cylindrical roller bearing accommodates axial displacement of the shaft in one direction, functioning as a non-locating bearing with two ribs on the outer ring and a smooth inner ring, allowing free axial movement of the inner ring relative to the outer ring. Bore diameter is 85.0 mm, outside diameter 150.0 mm, width 28.0 mm, mass 1.87 kg. Limiting speed reaches 6400 1/min, reference speed 4000 1/min. The cage is made in TVP2 design (polyamide, roller-guided), and the bearing is manufactured in E design with reinforced load rating. Radial internal clearance C3 (Group 3) allows for thermal expansion of the shaft during operation, compensating for temperature-induced fit changes. Running accuracy corresponds to P6 tolerance class, providing tighter dimensional and rotational tolerances than standard class. Due to the separable design of inner and outer rings with the roller-and-cage assembly, mounting and dismounting are simplified, and the bearing is suited for arrangements requiring free axial float on one bearing position within a shaft system.