This single-row cylindrical roller bearing has a bore of 65.0 mm, outside diameter of 140.0 mm, and width of 33.0 mm, weighing 2.2 kg. The outer ring carries two ribs while the inner ring is smooth (no ribs), making it a non-locating (floating) bearing type NU that allows axial displacement between the rings. It uses a polyamide cage (TVP2) and features the E design with reinforced roller set for increased load capacity. Radial internal clearance is CN (Group N), and running accuracy is in P6 class. Limiting speed is rated at 6800 rpm, with a reference speed of 4800 rpm. The non-locating design allows the bearing to compensate for axial shaft expansion or shortening without inducing additional axial forces, making it suitable for one bearing position in a shaft arrangement where free axial movement is required. The smooth inner ring combined with two ribs on the outer ring permits the inner ring to slide relative to the roller set. The TVP2 cage supports stable roller guidance at the stated speed ratings, while P6 accuracy suits applications where tighter running tolerances than standard P0 class are needed. Standard CN clearance is applied for typical mounting and operating temperature conditions.