This single row cylindrical roller bearing NJ213-E-XL-TVP2-C3 has a bore diameter of 65.0 mm, outside diameter of 120.0 mm, and width of 23.0 mm, with a net mass of 1.035 kg. The design features two ribs on the outer ring and one rib on the inner ring, configured as a semi-locating bearing of type NJ. The cage is a polyamide type TVP2, and the internal geometry follows the E design for increased load rating. Limiting speed is 8100 1/min, with a reference speed of 4900 1/min. The radial internal clearance is C3, providing greater than normal clearance to compensate for thermal expansion during operation. The semi-locating design allows axial displacement of the inner ring relative to the outer ring in one direction, making it suitable for applications where free axial movement must be accommodated on one side of the shaft. The one-piece design with ribs on both rings, combined with the roller and cage assembly, allows the bearing to carry radial loads while permitting easy mounting and dismounting due to the separable inner and outer ring construction.