This cylindrical roller bearing carries radial loads through a single row of rollers guided by a polyamide cage (TVP2), with two ribs on the outer ring and a smooth inner ring raceway, allowing the inner ring to shift axially relative to the outer ring. This non-locating design accommodates axial displacement caused by thermal expansion of the shaft. Bore diameter is 80.0 mm, outside diameter 140.0 mm, width 33.0 mm, and net mass 1.98 kg. The E design provides increased load capacity through internal geometry optimization. Limiting speed is 7000 1/min, reference speed 3400 1/min. Radial internal clearance is CN (Group N), suitable for standard fit conditions without preload adjustment. Running accuracy is manufactured to P6, giving tighter dimensional and rotational tolerances than standard P0 class, suitable for applications requiring precise shaft positioning. The open design without integrated seals requires external sealing and a separate lubrication arrangement, with grease or oil lubrication both possible depending on operating speed and temperature. The floating inner ring makes this bearing suitable for use as a non-locating bearing in a shaft arrangement where axial length compensation is required.