This cylindrical roller bearing NJ2216-E-XL-TVP2 is a single row design with a bore diameter of 80.0 mm, outside diameter of 140.0 mm, and width of 33.0 mm, weighing 2.195 kg. The outer ring has 2 ribs and the inner ring has 1 rib, giving a semi-locating configuration that carries radial loads and axial loads in one direction. The cage is a polyamide TVP2 type, and the E design provides an optimized internal geometry for increased load carrying capacity. Limiting speed is 7000 1/min, with a reference speed of 3400 1/min. Radial internal clearance is CN (Group N), suitable for standard mounting conditions without preload requirements. As a semi-locating bearing, it allows axial displacement of the non-locating side while fixing the shaft position at this bearing location, which is useful where thermal expansion of the shaft needs to be accommodated. The open design without integrated sealing means lubrication and contamination protection must be provided externally, and grease or oil lubrication can be applied depending on operating speed and temperature requirements.