This single-row cylindrical roller bearing NJ2308-E-XL-TVP2 has a bore of 40.0 mm, an outside diameter of 90.0 mm and a width of 33.0 mm, with a net mass of 0.951 kg. The outer ring carries two ribs and the inner ring one rib (type NJ), allowing axial displacement in one direction while the rings can be mounted and dismounted separately. The bearing runs at a limiting speed of 10900 1/min and a reference speed of 5800 1/min, using a TVP2 cage of polyamide construction and the reinforced E design for higher load capacity. The radial internal clearance corresponds to CN (Group N), suiting applications where standard clearance is required after fit and thermal expansion are accounted for. Its one-rib inner ring and two-rib outer ring configuration make it function as a semi-locating bearing, guiding the shaft axially in one direction while permitting free axial movement in the other, which is useful where a defined but limited axial fixation is needed alongside radial support.