This cylindrical roller bearing (NJ222-E-XL-TVP2) is a single-row design with two ribs on the outer ring and one rib on the inner ring, configured as a semi-locating bearing, type NJ. It has a bore diameter of 110.0 mm, outside diameter of 200.0 mm, and width of 38.0 mm, with a net mass of 4.86 kg. The polyamide cage is designated TVP2, the internal design follows the E series, and radial internal clearance corresponds to CN (Group N). Limiting speed is rated at 4750.0 1/min, with a reference speed of 3250.0 1/min. The rib arrangement allows the bearing to carry radial loads while accommodating axial displacement in one direction, making it suitable as a floating-type support in shaft arrangements where thermal expansion or slight axial movement must be absorbed. The CN clearance class provides standard internal play appropriate for typical operating temperatures and fit conditions, while the E design increases roller complement for higher radial load capacity within the same envelope dimensions. The TVP2 cage guides the rollers securely at the stated speed ratings, and as an open bearing it requires external sealing and a separate lubrication supply, either grease or oil, matched to the operating speed and load conditions.