This insert ball bearing carries a cylindrical outer ring combined with a steel aligning ring, which lets the outer ring seat itself in the housing and compensate for shaft misalignment. Bore diameter is 35.0 mm, outside diameter 80.0 mm, and net mass is 0.43 kg. Seals of type P are fitted on both sides, closing off the bearing interior from the outer face. The steel aligning ring allows the bearing to adjust to minor angular misalignment between shaft and housing without binding, so the unit does not require precise pre-alignment during installation. The double-side P seal arrangement keeps grease in place and blocks contaminants from entering, which supports operation without frequent relubrication once mounted.