Transmits combined radial and axial loads through a single row of balls set at a contact angle, with bore 25.0 mm, outside diameter 62.0 mm and width 17.0 mm. Net mass is 0.22 kg. The X-life design uses a plastic cage (TVP) instead of a pressed steel version, allowing a limiting speed of 15800 1/min and a reference speed of 9800 1/min. Because contact-angle geometry supports axial load in one direction, this angular contact ball bearing is normally mounted in pairs, back-to-back or face-to-face, to take up axial forces from both sides. The polyamide TVP cage keeps ball spacing stable at the stated speeds and reduces friction compared with a metal cage, which supports operation without extra internal clearance adjustment. As supplied open, on-site provision for lubrication and sealing is required to match the running conditions.