This double row angular contact ball bearing carries combined radial and axial loads in both directions with a single-component design that keeps internal geometry fixed under bearing assembly. Bore diameter is 25.0 mm, outside diameter 62.0 mm, width 25.4 mm, and net mass 0.349 kg. The limiting speed is 9300 1/min, with a reference speed of 9400 1/min. It is built with the X-life design for increased load rating within standard envelope dimensions, and uses a glass fibre reinforced plastic cage, designation TVH. Both sides are fitted with shields, protecting the raceways and balls from contamination and retaining the internal grease fill without contact seal friction. The double row arrangement combined with shields and a TVH cage makes this bearing suitable where stiff, precise axial and radial positioning is required at higher speeds, with reduced maintenance due to the shielded, pre-greased design.