This angular contact ball bearing carries combined radial and axial loads in one direction on a single row of balls set at a fixed contact angle. Bore diameter is 30.0 mm, outside diameter 62.0 mm, width 16.0 mm, and net mass is 199.0 g. It belongs to the X-life design line, using a solid plastic cage (TVP) and is fitted with seals on both sides (2RS), giving the limiting speed of 6500 1/min. The X-life execution provides increased load rating compared to standard design within the same envelope dimensions, allowing higher capacity at the same mounting space. The plastic cage reduces friction and mass, supporting stable ball guidance at the rated speed, while the two-sided sealing retains the internal grease fill and blocks contamination, making relubrication unnecessary under normal operating conditions. As a single-row angular contact type, it should be paired with a second bearing arranged in an O or X configuration when axial loads act in both directions, or duplexed if preloaded shaft support is needed.