Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6224#N1
- EAN
- 4012801203890
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 120 mm
- Outside diameter D
- 215 mm
- Width B
- 40 mm
- Mass
- 5.50 kg
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 154000 N
- Static load rating C₀
- 123000 N
- Limiting speed
- 4200 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 14.8
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 6400.0 N
- Inner ring shoulder diameter
- 151.46 mm
- Lubricant
- without
- Max. operating temperature
- 150.0 °C
- Maximum fillet radius
- 2.1 mm
- Maximum housing shoulder diameter
- 203.0 mm
- Min. operating temperature
- -30.0 °C
- Minimum chamfer
- 2.1 mm
- Minimum shaft shoulder diameter
- 132.0 mm
- Outer ring shoulder diameter
- 185.04 mm
- PFAS
- no
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- Reference speed
- 4250.0 1/min
- RoHS
- RoHS compliant
- Type of seal
- without
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads through a single row of balls guided by a steel sheet metal cage (JN). Bore diameter is 120.0 mm, outside diameter 215.0 mm, width 40.0 mm, and net mass reaches 5.5 kg. Limiting speed is rated at 4200.0 1/min, with a reference speed of 4250.0 1/min. Radial internal clearance falls within the CN (Group N) group. The steel sheet metal cage keeps friction and heat generation low at higher rotational speeds, supporting operation near the stated speed limits. Standard CN clearance suits general-purpose mounting without preload requirements, and the open design (bore type Z) allows relubrication with grease or oil as needed. Dimensionally and constructionally, this bearing corresponds to SKF 6224, NSK 6224, and NTN 6224.
The same bearing from other manufacturers (14 designations)
Same size and design — suffix notation differs between brands.
FAG
6224
original — this page
equivalent designation
DENN
600370
FEDERAL
1224
FLT
6224
KOYO
6224
NACHI
6224
NSK
6224
NTN
6224
PEER
6224
SKF
6224
SNR
6224
STEYR
6224
VOLVO
7181446
ZKL
6224
ZWZ
6224
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6224
Deep groove ball bearing
⌀120 × 215 × 40 mm
od EUR 157.07net
+ VAT 23% = EUR 193.20 gross
Cheaper in larger quantities
| from 5 pcs | EUR 153.93 | −2% |
| from 10 pcs | EUR 152.36 | −3% |
| from 25 pcs | EUR 149.22 | −5% |
| from 50 pcs | EUR 146.08 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
