Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6219#N1
- EAN
- 4012801077491
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 95 mm
- Outside diameter D
- 170 mm
- Width B
- 32 mm
- Mass
- 2.73 kg
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 116000 N
- Static load rating C₀
- 82000 N
- Limiting speed
- 5300 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 14.5
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 4800.0 N
- Inner ring shoulder diameter
- 118.66 mm
- Lubricant
- without
- Max. operating temperature
- 150.0 °C
- Maximum fillet radius
- 2.1 mm
- Maximum housing shoulder diameter
- 158.0 mm
- Min. operating temperature
- -30.0 °C
- Minimum chamfer
- 2.1 mm
- Minimum shaft shoulder diameter
- 107.0 mm
- Outer ring shoulder diameter
- 146.72 mm
- PFAS
- no
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- Reference speed
- 4950.0 1/min
- RoHS
- RoHS compliant
- Type of seal
- without
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
Carries radial loads with limited axial load in a single row of balls running in deep grooves, giving a compact design suitable for shafts with a bore diameter of 95.0 mm. The bearing has an outside diameter of 170.0 mm, a width of 32.0 mm, and a mass of 2.73 kg. It is fitted with a steel sheet metal cage (JN) and runs with normal radial internal clearance (CN, Group N). The limiting speed is 5300.0 1/min and the reference speed is 4950.0 1/min. The normal internal clearance and standard cage design make this bearing suitable for general radial support duties without special load or misalignment requirements. The bore type Z should be checked against the shaft and fit tolerances before mounting. Dimensionally and constructionally, it corresponds to SKF 6219, NSK 6219 and NTN 6219.
The same bearing from other manufacturers (19 designations)
Same size and design — suffix notation differs between brands.
FAG
6219
original — this page
equivalent designation
FBC
6219
FEDERAL
1219
FLT
6219
KOYO
6219
MGM
6219
NACHI
6219
ND
3219
NSK
6219
NTN
6219
NWG
6219
PEER
6219
RHP
6219
SKF
6219
SNR
6219
STEYR
6219
TATR
N-221
ZKL
6219
ZWZ
6219
conditionally interchangeable
These items are conditionally interchangeable — check the design before ordering.
NSK
6219CM
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6219
Deep groove ball bearing
⌀95 × 170 × 32 mm
od EUR 73.20net
+ VAT 23% = EUR 90.04 gross
Cheaper in larger quantities
| from 5 pcs | EUR 71.84 | −2% |
| from 10 pcs | EUR 71.10 | −3% |
| from 25 pcs | EUR 69.64 | −5% |
| from 50 pcs | EUR 68.17 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
