Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6019-2RSR#N1
- EAN
- 4026677268686
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 95 mm
- Outside diameter D
- 145 mm
- Width B
- 24 mm
- Mass
- 1.27 kg
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 64000 N
- Static load rating C₀
- 54000 N
- Limiting speed
- 2420 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 15.8
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 3150.0 N
- Inner ring shoulder diameter
- 110.6 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 1.5 mm
- Maximum housing shoulder diameter
- 138.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 1.5 mm
- Minimum shaft shoulder diameter
- 102.0 mm
- Outer ring caliber diameter
- 131.84 mm
- Outer ring shoulder diameter
- 129.12 mm
- PFAS
- no
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads in one row, with a bore of 95.0 mm, outside diameter of 145.0 mm, and width of 24.0 mm. The single-row ball set runs in a steel sheet metal cage (JN), and both sides are fitted with seals, keeping grease in and contaminants out. Mass is 1.27 kg, and the limiting speed is rated at 2420 1/min. Radial internal clearance falls in group CN, suitable for standard fits without added preload requirements. Because the bearing is sealed, it is intended for grease lubrication and does not need external relubrication provisions. Dimensionally and constructionally it corresponds to SKF 6019-2RS1, NSK 6019DDU, and NTN 6019LLU.
The same bearing from other manufacturers (4 designations)
Same size and design — suffix notation differs between brands.
FAG
6019-2RSR
original — this page
equivalent designation
PEER
6019-2RLD
SKF
6019-2RS1
NSK
6019DDU
NTN
6019LLU
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6019-2RSR
Common designation: 6019 2RS
Deep groove ball bearing
⌀95 × 145 × 24 mm
od EUR 69.49net
+ VAT 23% = EUR 85.47 gross
Cheaper in larger quantities
| from 5 pcs | EUR 68.20 | −2% |
| from 10 pcs | EUR 67.50 | −3% |
| from 25 pcs | EUR 66.11 | −5% |
| from 50 pcs | EUR 64.72 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
