This deep groove ball bearing carries radial and axial loads in both directions on a single row of balls, with a bore of 70.0 mm, outside diameter of 125.0 mm and width of 24.0 mm. Net mass is 1.088 kg, and the limiting speed is rated at 3100 1/min. The bearing is fitted with seals on both sides (2RSR) and a steel sheet metal cage (JN), with radial internal clearance C3, which is wider than normal to compensate for thermal expansion during operation. The sealed design keeps grease inside and contaminants out, so the bearing is supplied pre-lubricated and requires no additional sealing arrangement in the housing. The C3 clearance suits applications with interference fits or elevated operating temperatures, where standard clearance would otherwise be reduced to a value causing excessive preload. Dimensional and constructional equivalents are SKF 6214-2RS1/C3, NSK 6214DDUC3 and NTN 6214LLUC3.