Deep groove ball bearing 6014-2Z-C3 from FAG is a single row design with a 70.0 mm bore, 110.0 mm outside diameter and 20.0 mm width, weighing 0.596 kg. It is fitted with metal shields on both sides and uses a steel sheet metal cage (JN). Radial internal clearance is increased to C3, above the standard range. Limiting speed is rated at 7300 1/min, with a reference speed of 6800 1/min. The C3 clearance compensates for shaft expansion and shaft-to-housing fit tolerances under load, allowing operation where thermal growth would otherwise tighten the internal clearance excessively. The steel shields on both sides restrict ingress of coarse contaminants while leaving the internal clearance open for relubrication with grease or oil as required by the application. Dimensionally and constructionally this bearing corresponds to SKF 6014-2Z/C3, NSK 6014ZZC3 and NTN 6014ZZC3.