Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6015-2RSR-C3#N1
- EAN
- 4012801163958
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 75 mm
- Outside diameter D
- 115 mm
- Width B
- 20 mm
- Mass
- 654 g
- Radial clearance
- C3 (Group 3)
Load ratings and operation
- Dynamic load rating C
- 42000 N
- Static load rating C₀
- 33500 N
- Limiting speed
- 3050 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 15.8
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 2020.0 N
- Inner ring shoulder diameter
- 88.05 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 1.0 mm
- Maximum housing shoulder diameter
- 109.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 1.1 mm
- Minimum shaft shoulder diameter
- 81.0 mm
- Outer ring caliber diameter
- 105.34 mm
- Outer ring shoulder diameter
- 102.58 mm
- PFAS
- no
- Radial internal clearance
- C3 (group 3)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads in a single row of balls running in a groove-shaped raceway. It has a bore diameter of 75.0 mm, an outside diameter of 115.0 mm, a width of 20.0 mm and a mass of 0.654 kg. The bearing is fitted with seals on both sides and uses a steel sheet metal cage (JN). Limiting speed is 3050 1/min, and the internal clearance is C3, wider than standard. The C3 clearance compensates for thermal expansion during operation and for a tight fit on the shaft, keeping the bearing free of preload under such conditions. The two-side sealing retains the grease fill inside the bearing and keeps out dust and moisture, so no external lubrication access is required after mounting. Dimensionally and constructionally, this bearing corresponds to SKF 6015-2RS1/C3, NSK 6015DDUC3 and NTN 6015LLUC3.
The same bearing from other manufacturers (5 designations)
Same size and design — suffix notation differs between brands.
FAG
6015-2RSR-C3
original — this page
equivalent designation
PEER
6015-2RLD-C3
SKF
6015-2RS1/C3
STEYR
6015A/2RS1/C3
NSK
6015DDUC3
NTN
6015LLUC3
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6015-2RSR-C3
Common designation: 6015 2RS C3
Deep groove ball bearing
⌀75 × 115 × 20 mm
od EUR 30.95net
+ VAT 23% = EUR 38.07 gross
Cheaper in larger quantities
| from 5 pcs | EUR 30.33 | −2% |
| from 10 pcs | EUR 30.02 | −3% |
| from 25 pcs | EUR 29.40 | −5% |
| from 50 pcs | EUR 28.78 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
