This double row deep groove ball bearing carries a bore of 75.0 mm, an outside diameter of 130.0 mm and a width of 31.0 mm, with a net mass of 1.58 kg. The two rows of balls are guided by a glass fibre reinforced plastic cage, designation TVH, which reduces friction and mass compared to a machined cage. Radial internal clearance falls in the CN (Group N) range. The limiting speed is rated at 4800 1/min, with a reference speed of 4450 1/min. The double row design gives higher radial load capacity than a single row bearing of the same envelope dimensions, while still allowing pure radial as well as combined loads with a moderate axial component in both directions. The CN clearance suits standard mounting conditions without preload, and the polyamide cage supports smooth ball guidance at the stated speed ratings. As supplied open, without integrated seals or shields, lubrication and sealing must be provided by the housing design, so grease or oil supply should be arranged accordingly.