Carries combined radial and axial loads in both directions thanks to the double-row angular contact design, with a 45.0 mm bore, 85.0 mm outside diameter and 30.2 mm width. Mass is 0.627 kg and the limiting speed reaches 6300.0 1/min. The bearing uses the X-life design for increased load carrying capacity within standard boundary dimensions, runs on a solid plastic cage (TVH) and is fitted with seals on both sides (2HRS), so it is pre-lubricated with grease and protected against contamination without further sealing arrangements. The C3 internal clearance compensates for temperature-related fit tightening during operation, keeping the bearing free of excessive preload at working speed. Since both sides are sealed, relubrication is not required, which simplifies mounting where access for maintenance is limited. The double-row angular contact arrangement gives the bearing stiffness under combined loading and axial guidance in both directions, making it suitable for shaft positions where a single bearing has to locate the shaft axially without a counterpart.