Tapered roller bearing 32012-X-XL is a single-row separable design with main dimensions according to DIN 720, bore diameter 60.0 mm, outside diameter 95.0 mm, and net mass 0.61 kg. The tapered rollers and raceways are set at an angle, so the bearing takes up radial load and axial load in one direction simultaneously. The limiting speed is 8800 1/min, and the cage is of standard design. Because the inner and outer rings are separable, mounting allows adjustment of the internal clearance during assembly, which is set to match the specific application and shaft/housing fit. The angular contact geometry means two bearings are typically arranged in an opposed pair to support axial loads from both directions and to control shaft positioning. Lubrication and sealing are not integrated into this bearing and must be provided externally, consistent with the open, separable construction.