This single-row tapered roller bearing carries the load through conical rolling elements set between an inner and outer ring, with main dimensions to DIN 720 and a separable design that allows independent mounting of cone and cup. Bore diameter is 60.0 mm, outside diameter 110.0 mm, net mass 0.914 kg, limiting speed 8200 1/min, fitted with a standard cage. The separable construction simplifies fitting and adjustment of internal clearance during assembly, since the inner ring assembly can be mounted separately from the outer ring. The tapered contact angle allows the bearing to take combined radial and axial loads in one direction, so a mirrored bearing is needed on the opposite side of the shaft for axial support in both directions. Suitable for arrangements where the shaft is subject to combined loading and where clearance setting during mounting is required.