This spherical roller bearing accommodates radial loads together with angular misalignment between shaft and housing, transmitting load through two rows of barrel-shaped rollers guided on a common sphered outer ring raceway. Main dimensions follow DIN 635-2, with a bore of 110.0 mm, outside diameter of 200.0 mm and width of 69.8 mm; net mass is 9.289 kg. The limiting speed is 3250.0 1/min and the reference speed 2100.0 1/min. Design is E1A with a solid brass cage (M). The bore type K indicates a tapered bore with 1:12 taper, allowing the bearing to be mounted directly on a tapered shaft seat or fitted using an adapter or withdrawal sleeve, which simplifies installation and dismounting and permits adjustment of internal clearance during fitting. Radial internal clearance corresponds to CN (Group N), suitable where standard operating clearance is required. The bearing is supplied without integrated seals and follows standard relubrication provisions, so lubricant supply and any sealing arrangement must be provided externally. The self-aligning capability of the design allows continued operation under shaft deflection or housing misalignment without inducing additional internal stress on the rolling elements.