This spherical roller bearing accommodates radial loads together with shaft misalignment thanks to its two rows of rollers running on a common sphered outer race. Main dimensions follow DIN 635-2: bore 60.0 mm, outside diameter 130.0 mm, width 46.0 mm, mass 2.7 kg. The tapered bore, taper 1:12 (K), allows mounting directly on a tapered shaft seat or with a sleeve, giving controlled clearance reduction during fitting. Limiting speed is 5400 1/min, reference speed 4200 1/min, and the cage is executed in JPA design. Radial internal clearance is C3, wider than normal, which compensates for interference fit on the tapered seat and for thermal expansion in operation. The E1 design provides an optimized internal geometry for higher load carrying capacity and reduced friction. Standard relubrication feature allows regreasing without dismounting the bearing. The tapered bore and self-aligning capability make this bearing suitable for applications where shaft deflection or housing misalignment must be tolerated without generating additional edge stresses on the rollers.