This four-point contact bearing carries loads in both axial directions through a single row of balls contacting the raceways at four points, allowing it to take up axial loads from either side with one bearing instead of a paired arrangement. Bore diameter is 25.0 mm, outside diameter 62.0 mm, and width 17.0 mm, with a net mass of 0.273 kg. The bearing is fitted with a solid brass cage (MPA), the limiting speed is 23300 1/min and the reference speed 9000 1/min. The split-ring design typical of this bearing type allows the raceways to be separated for mounting, which lets the balls fill the full circumference and increases the axial load rating per unit size compared to a standard ball bearing. The solid brass cage gives stable ball guidance and low friction at higher speeds, and the design is suited for applications where combined axial loads from both directions must be carried on a compact radial envelope without needing two opposed bearings.