This single row cylindrical roller bearing (NUP2204-E-XL-TVP2) has a bore diameter of 20.0 mm, outside diameter of 47.0 mm, and width of 18.0 mm, with a net mass of 0.149 kg. The design follows the NUP type, featuring two ribs on the outer ring and one rib on the inner ring with an internal loose rib washer, allowing axial displacement of the inner ring relative to the outer ring on one side, making it a locating bearing in the radial direction. The polyamide cage (TVP2) guides the rollers, and the reinforced E design increases load carrying capacity within the same envelope dimensions. Limiting speed is rated at 22000 1/min, with a reference speed of 11100 1/min. The internal clearance falls within the CN (Group N) range, suitable for standard fit and operating conditions without special thermal or load-induced preload requirements. The separable inner ring allows straightforward mounting and dismounting, and the roller-rib contact geometry supports pure radial load combined with light axial guidance in one direction. This bearing type is intended for applications where a defined axial location point is required while allowing free axial movement of the shaft on the opposite bearing position.