This cylindrical roller bearing separates radial load from axial displacement, acting as a non-locating bearing with two ribs on the outer ring and a smooth inner ring, allowing free axial movement between the rings. It has a bore diameter of 130.0 mm, outside diameter of 280.0 mm, and width of 58.0 mm, with a net mass of 15.64 kg. The single-row design type NU uses a TVP2 cage, radial internal clearance C3, and reinforced E design geometry for higher load capacity. Limiting speed is 3250.0 1/min, with a reference speed of 2430.0 1/min. Running accuracy is in P6 class, suitable where tighter dimensional and rotational tolerances are required. The C3 internal clearance compensates for thermal expansion during operation, while the non-locating configuration allows the shaft to expand or contract axially without inducing additional load on the bearing. The polymer TVP2 cage guides the rollers with reduced friction, and the smooth inner ring design supports axial displacement of the outer ring relative to the shaft.