This single row cylindrical roller bearing carries pure radial loads and functions as a semi-locating bearing, with two ribs on the outer ring and one rib on the inner ring (type NJ), allowing axial displacement in one direction while providing guidance in the other. Bore diameter is 120.0 mm, outside diameter 215.0 mm, width 58.0 mm, and net mass 8.5 kg. Limiting speed reaches 4350 1/min, with a reference speed of 2500 1/min. The E design provides increased load carrying capacity compared to standard internal geometry. The bearing is fitted with a TVP2 cage, a solid polyamide cage designed for reliable roller guidance at higher speeds. Radial internal clearance corresponds to CN (normal, Group N), suitable for standard fit conditions without preload. As the separable inner and outer rings allow independent mounting, this design simplifies installation where axial adjustment or thermal expansion of the shaft must be accommodated. No integrated seals are present, so external sealing and a suitable lubrication method must be provided separately.