This cylindrical roller bearing accommodates axial displacement of the shaft relative to the housing, as its outer ring carries two ribs while the inner ring runs smooth, allowing free axial movement in one direction as a non-locating bearing. It is a single row design with a polyamide cage (TVP2), bore diameter 100.0 mm, outside diameter 215.0 mm, and width 47.0 mm, weighing 7.41 kg. The limiting speed is 4250.0 1/min, with a reference speed of 3350.0 1/min. The radial internal clearance corresponds to the normal group (CN), and the running accuracy is manufactured to P6 tolerance, giving tighter rotational precision than the standard class. The E design increases the load-carrying capacity of the roller set within the same envelope dimensions. As a non-locating bearing, it is suited for the free end of a shaft arrangement where axial compensation is required, while the smooth inner ring surface allows unobstructed axial sliding of the rollers during operation.