This single row cylindrical roller bearing accommodates axial displacement between shaft and housing, functioning as a non-locating bearing. It has two ribs on the outer ring and a smooth inner ring, allowing free axial movement of the inner ring relative to the outer ring. Bore diameter is 90.0 mm, outside diameter 160.0 mm, width 30.0 mm, and net mass 2.31 kg. Limiting speed reaches 6000 1/min, with a reference speed of 3900 1/min. The cage is a polyamide type TVP2, and the E design provides increased load carrying capacity through optimized internal geometry. Radial internal clearance falls within CN (Group N), suitable for standard fit conditions without preload. Running accuracy corresponds to class P6, offering tighter dimensional and rotational tolerances than standard P0 bearings. The non-locating design compensates for thermal expansion and shaft misalignment along the axial direction, while the absence of an inner ring rib allows the inner ring to shift freely within the outer ring raceway during operation.