Carries radial loads within a compact cross-section, with the solid inner ring located on the shaft and needle rollers guided by a TV cage machined to close pocket tolerances. Bore is 45.0 mm, outside diameter 62.0 mm, width 35.0 mm, net mass 307.0 g. Limiting speed is 9200 1/min, reference speed 4950 1/min, and radial internal clearance is set to C3 (Group 3), giving more running clearance than a standard-clearance bearing to compensate for interference fits and thermal expansion during operation. The light series NKI construction keeps radial space requirements low while the full needle roller complement provides high load carrying capacity per unit of cross-section. The TV cage retains the rollers and limits skewing at the speeds stated above, and the C3 internal clearance suits applications where shaft and housing tolerances or operating temperature would otherwise tighten a standard-clearance fit. As an open bearing it requires external sealing and lubrication with grease or oil suited to the ambient conditions and speed range specified.