This single row cylindrical roller bearing carries a bore of 50.0 mm, outside diameter of 110.0 mm and width of 27.0 mm, with a net mass of 1.16 kg. The outer ring has two ribs and the inner ring one rib, forming a semi-locating (type NJ) design that allows axial displacement of the shaft in one direction. The cage is a polyamide TVP2 type, and the bearing is built to the reinforced E design for increased load carrying capacity. Limiting speed is 8900 1/min, with a reference speed of 6000 1/min. Radial internal clearance is C3 (Group 3), which compensates for tighter fits and thermal expansion during operation. As a semi-locating bearing, it allows for axial movement of the shaft on the non-fixed side while still providing radial guidance, making it suitable for shaft arrangements where thermal growth or slight misalignment must be accommodated. The TVP2 cage design supports smooth roller guidance at the given speed ratings, and the open, unsealed construction requires external lubrication and sealing arrangements in the housing.