This cylindrical roller bearing carries load through a single row of rollers guided by a cage, with an outer ring featuring two ribs and an inner ring featuring one rib, corresponding to design type NJ. Bore diameter is 30.0 mm, outside diameter 72.0 mm, width 19.0 mm, and net mass is 0.384 kg. The reinforced E design allows a limiting speed of 14200 1/min and a reference speed of 8900 1/min. The cage is made in TVP2 execution, and radial internal clearance corresponds to CN (Group N). The rib arrangement makes this bearing a semi-locating type, allowing axial displacement of the shaft relative to the housing on one side while still providing guidance in the other direction. This configuration suits applications where free axial movement must be combined with radial support and where a defined axial position is only needed on one bearing side. The CN clearance class and TVP2 cage support stable roller guidance at the specified speed ratings.