This single row cylindrical roller bearing carries two ribs on the outer ring and one rib on the inner ring, matching the NJ design that allows axial displacement in one direction while locating the shaft in the other. Bore diameter is 35.0 mm, outside diameter 72.0 mm, width 23.0 mm, and net mass is 0.404 kg. The E design provides an optimized internal geometry for increased load carrying capacity, and the cage is a glass-fibre reinforced polyamide cage (TVP2), guiding the rollers with reduced friction. Limiting speed reaches 12300 1/min, reference speed 7200 1/min. Radial internal clearance corresponds to group CN (normal), suitable for standard fit conditions without preload. The semi-locating design permits axial displacement between inner and outer ring, making it suitable for supporting a shaft position where thermal expansion or shaft misalignment along the axial direction must be accommodated, while the ribs on both rings still provide radial guidance. The separable inner and outer ring construction simplifies mounting and dismounting in applications requiring high radial load capacity at moderate to high rotational speeds.