Carries radial loads and axial displacement of the shaft relative to the housing, since the design combines two ribs on the outer ring with a single rib on the inner ring, allowing free axial movement in one direction while still locating the shaft — a semi-locating bearing. The single-row cylindrical roller bearing NJ2206-E-XL-TVP2 has a bore of 30.0 mm, outside diameter of 62.0 mm, and width of 20.0 mm, with a net mass of 0.272 kg. It reaches a limiting speed of 16300 1/min and a reference speed of 8000 1/min, with the reinforced E design increasing load capacity within the standard envelope dimensions. The polyamide cage (TVP2) reduces friction and mass compared to a machined cage, supporting the higher permissible speeds, while the CN radial internal clearance (Group N) corresponds to normal operating conditions without preload. The bearing is supplied without an inner or outer ring seal, so lubrication must be provided externally, and its semi-locating arrangement makes it suitable for mounting positions where thermal expansion of the shaft needs to be compensated without introducing axial preload.