This single-row cylindrical roller bearing, type N2, has a bore of 35.0 mm, an outside diameter of 72.0 mm, and a width of 17.0 mm, with a net mass of 0.304 kg. The outer ring has no ribs while the inner ring carries two ribs, giving a non-locating bearing design that allows axial displacement between rings. The roller and cage assembly is retained by a polyamide cage (TVP2), and radial internal clearance is CN (Group N), the normal clearance group. The non-locating construction lets this bearing accommodate axial shaft expansion without generating axial load, making it suitable as the free-side bearing in a shaft arrangement paired with a locating bearing elsewhere on the shaft. Normal (CN) radial clearance supports typical fit and temperature conditions without additional clearance selection. The TVP2 cage design guides the rollers and permits relubrication with grease or oil, depending on the operating conditions of the installation.