This insert bearing has a bore diameter d of 35 mm and is secured to the shaft by means of an eccentric locking collar, with the inner ring extended on one side. The sealing is formed by a pressed steel washer fitted with a rubberized lip. Weight is 0.48 kg. Further dimensions as read from the catalogue drawing: B = 38.9, C = 19, D = 72, c = 25.5, m = M 10 x 1.25, s = 9.5, c0 = 15.3, d1 = 44.6, d2 = 51.0. The eccentric collar locking method allows the bearing to be clamped directly onto the shaft without an additional adapter sleeve, which simplifies alignment during mounting. The extended inner ring on one side, combined with the set screw or collar arrangement, supports axial positioning of the housing unit on the shaft. The pressed steel washer with a rubberized sealing lip protects the raceway from dust and coarse contamination while retaining the internal grease fill. Dimensionally and constructionally equivalent to SKF YET 207.