This insert bearing uses a spherically ground outer ring mounted on the shaft by an eccentric locking collar, with the inner ring extended on both sides. The design is intended for a fixed direction of rotation. Bore diameter (d) is 60 mm, weight is 1.80 kg. From the catalogue drawing: B = 77.7 mm, C = 24 mm, D = 110 mm, c = 52.0 mm, m = M 10 x 1.25, s = 30.9 mm, c0 = 36.0 mm, d1 = 75.5 mm, d2 = 84.2 mm — these values should be checked against the drawing on the product card for correct orientation during mounting. The bearing is sealed on both sides and factory-filled with lithium grease class 2, so it can be put into service without additional lubrication at assembly. The eccentric collar locking method requires rotation in one fixed direction only, and the extended inner ring geometry should be matched to the housing and shaft shoulder dimensions given above. Dimensional and constructional equivalent: SKF YEL 212.