This insert bearing carries a spherically ground outer ring locked onto the shaft by an eccentric locking collar, with the inner ring extended on both sides. The bore diameter d is 35 mm, weight is 0.61 kg. Further dimensions read from the catalogue drawing: B = 51.1 mm, C = 19 mm, D = 72 mm, c = 25.5 mm, m = M 8 x 1.00, s = 18.8 mm, c0 = 15.3 mm, d1 = 46.1 mm, d2 = 55.6 mm. The dimensional-constructional equivalent is SKF YEL 207. The eccentric locking collar design is intended for constant direction of rotation, which sets the mounting orientation and locking procedure during installation. Both sides are sealed, and the bearing is factory filled with lithium grease class 2, so no separate lubrication is required before startup. The extended inner ring on both sides allows shaft engagement beyond the housing width given by dimension B, which should be checked against the mounting arrangement on the drawing.