This insert bearing carries a bore diameter (d) of 35 mm and locates on the shaft by means of an eccentric locking collar. The outer ring is spherically ground, and the inner ring is extended on both sides, which suits the design for a fixed direction of rotation. From the catalogue drawing, the dimension B is 51.1 mm, C is 19 mm, D is 72 mm, c is 25.5 mm, m is M 8 x 1.00, s is 18.8 mm, c0 is 15.3 mm, d1 is 46.1 mm, and d2 is 55.6 mm; these can be cross-checked against the drawing on the product card. The unit weight is given as 0.61 kg, relevant for handling during mounting. The bearing is sealed on both sides and pre-packed with lithium grease of consistency class 2, so no separate lubrication is required before installation. The eccentric collar locking method requires the shaft to rotate in one fixed direction to keep the collar secure, which should be observed when planning the drive layout. The dimensional and constructional equivalent listed for this bearing is SKF YEL 207.