This insert ball bearing carries a spherical outer ring housed in a non-locating design, with a drive slot machined into the inner ring for shaft coupling. Bore diameter is 60.0 mm, outside diameter 110.0 mm, width 61.9 mm, and net mass is 1.38 kg. Sealing is designated KRR, provided by R seals fitted on both sides of the bearing. The spherical outer ring allows the bearing to accommodate misalignment between shaft and housing, which simplifies alignment during mounting. The drive slot in the inner ring transmits torque directly from the shaft without a separate locking element, while the double-sided R seals protect the internal grease fill and rolling elements from contamination. As a non-locating bearing, it permits axial displacement of the shaft relative to the housing, making it suitable where thermal expansion or slight axial movement must be compensated.