Technical data
39 parametersIdentification
- Manufacturer
- INA
- Type
- Spherical plain bearing
- Part number (SKU)
- GE20-DO#N1
- EAN
- 4012802567441
Dimensions
- Bore d
- 20 mm
- Outside diameter D
- 35 mm
- Mass
- 65 g
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 38500 N
- Static load rating C₀
- 148000 N
- Sealing
- without
Full manufacturer specification28 parameters · expand
- Ball diameter
- 29.0 mm
- Bore diameter bearing, lower tolerance
- -0.01 mm
- Bore diameter bearing, upper tolerance
- 0.0 mm
- Coating
- Durotect M
- Connection measure Inner ring
- 24.1 mm
- Edge Spacing
- 0.3 mm
- Housing Connection Diameter
- 27.5 mm
- Inner ring width
- 16.0 mm
- Maintenance
- Maintenance required
- Material
- Steel
- Max. operating temperature
- 200.0 °C
- Min. operating temperature
- -60.0 °C
- Outer ring width
- 12.0 mm
- Outside diameter, lower tolerance
- -0.011 mm
- Outside diameter, upper tolerance
- 0.0 mm
- PFAS
- no
- Radial Clearance
- 0,04 - 0,082
- Radial clearance, maximum
- 0.082 mm
- Radial clearance, minimum
- 0.04 mm
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Sealing
- without
- Tilt angle
- 9.0 °
- Width inner ring, lower tolerance
- -0.12 mm
- Width inner ring, upper tolerance
- 0.0 mm
- Width outer ring, lower tolerance
- -0.24 mm
- Width outer ring, upper tolerance
- 0.0 mm
Classification
- Manufacturer category
- Rolling and Plain Bearings › Plain Bearings › Spherical Plain Bearings › Spherical Plain Bearings, maintenance required
- eCl@ss class
- 23-05-01-06
- UNSPSC
- 31171515
Description
This plain bearing accommodates radial loads through a steel/steel sliding contact between the inner and outer ring, allowing angular misalignment between the shaft and housing. Built to DIN ISO 12240-1 in dimension series E, the GE20-DO has an open design without sealing and carries a net mass of 65.0 g. Radial internal clearance falls within group CN (Group N). As an open, unsealed bearing, it requires maintenance and periodic relubrication to sustain the sliding surfaces under load. The steel/steel pairing supports high load ratings, and the spherical contact geometry compensates for shaft deflection or misalignment within the housing bore. Regular inspection of the sliding surfaces is advised given the absence of sealing against contamination.
The same bearing from other manufacturers (8 designations)
Same size and design — suffix notation differs between brands.
INA
GE20-DO
original — this page
equivalent designation
ASK
GE20
AURORA
GE20ES
JMC
GE20ES
LS
GE20ES
RBC
MB20
SKF
GE20DSS
SKF
GE20ES
conditionally interchangeable
These items are conditionally interchangeable — check the design before ordering.
ELGES
GE20DG
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
GE20-DO
Spherical plain bearing
⌀20 × 35 mm
od EUR 8.17net
+ VAT 23% = EUR 10.05 gross
Cheaper in larger quantities
| from 5 pcs | EUR 8.01 | −2% |
| from 10 pcs | EUR 7.93 | −3% |
| from 25 pcs | EUR 7.77 | −5% |
| from 50 pcs | EUR 7.60 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
