This single row angular contact ball bearing carries axial loads in one direction combined with radial loads, using a defined contact angle between raceways and balls. The 7322-B-XL-JP has a bore of 110.0 mm, outside diameter of 240.0 mm, and width of 50.0 mm, with a net mass of 9.75 kg. It belongs to the X-life design line and uses a JP cage made from pressed steel sheet metal. Limiting speed is 3650 1/min, reference speed 3150 1/min. The steel sheet metal JP cage guides the balls with defined pockets, keeping consistent spacing under the stated speed range. As a single row design, this bearing is intended for arrangements where axial load acts predominantly in one direction, typically paired with a second angular contact bearing for both-direction axial support. The open design (no seals or shields specified) requires external lubrication and sealing to be provided by the surrounding housing, and mounting should maintain the correct preload according to the contact angle geometry of this series.