This single row angular contact ball bearing carries loads acting simultaneously in radial and axial directions, transmitting them through the contact angle of the ball set. Bore diameter is 75.0 mm, outside diameter 160.0 mm, width 37.0 mm, and net mass 3.071 kg. The cage is a solid plastic cage (TVP), part of the X-life design line, marked as 7315-B-XL-TVP-UA. Limiting speed reaches 5600 1/min, with a reference speed of 4500 1/min. The plastic cage design reduces friction and mass compared to metal cages, supporting operation closer to the stated limiting speed while keeping running noise low. Being a single row angular contact bearing, it should be mounted in pairs or against a counterpart bearing when axial loads act in both directions, and correct preload setting is required to maintain the intended internal geometry. The bearing is supplied open, without an integrated seal, so lubrication and sealing must be provided externally according to the application's operating conditions.