This single row angular contact ball bearing carries loads at a defined contact angle, allowing it to support combined radial and axial loads simultaneously in one direction. The bore diameter is 160.0 mm, outside diameter 290.0 mm, width 48.0 mm, and net mass 13.9 kg. The bearing is fitted with a solid brass cage, designation MP, which provides stable ball guidance and mechanical strength at elevated speeds. The limiting speed is rated at 3500.0 1/min, with a reference speed of 2650.0 1/min. Due to its single-row angular contact design, this bearing is suited for applications requiring high axial stiffness in one direction combined with radial load capacity. The solid brass cage supports reliable operation at the higher end of the speed range while maintaining precise ball spacing under load. As with all angular contact bearings of this type, correct axial preload or pairing should be considered during mounting to achieve the intended load distribution.