This single row angular contact ball bearing transmits combined radial and axial loads through balls set at a defined contact angle, supported on one side by a solid shoulder. It carries a plastic cage (TVP) from the X-life design line, giving a bore of 65.0 mm, outside diameter of 120.0 mm and width of 23.0 mm at a net mass of 1.01 kg. Limiting speed is 7600 1/min, with a reference speed of 5700 1/min. The single-side contact angle geometry means axial load capacity depends on mounting direction, so this bearing is typically paired with a matching unit in a back-to-back or face-to-face arrangement to take up axial loads from both sides. The plastic cage reduces friction and mass compared to a stamped steel cage, supporting the higher limiting speed rating, while the open design allows lubrication to be selected and applied according to the specific mounting and speed conditions.